Can anyone tell me if all peugeot 306 driveshafts are the same?

I have a w-reg peugeot 306 1.4 meridian which has ABS all i wanted know if all the 306's drive shafts are all the same? as i need to change mine on the drivers side? i appreciate it thank you.|||If you want your ABS to keep working (which you are probably required to do by law) you will need to ensure that the replacement shaft has the ABS sensor ring teeth - look for a ring around the driveshaft at the outer CV joint that is made up of a lot of square teeth.


If the replacement shaft has no teeth, it will probably fit your car but you will get an ABS error. An ABS driveshaft wil work fine in a car without ABS though.


It is possible that a driveshaft out of a larger engined car may be different to yours (a 1.4 205 has a smaller spline than a 1.9 205 for example) so it is probably easiest to try to get one from a similar car to yours unless you can take yours out first to check.|||They are a little different. They all fit though, but some are different because some have ABS.|||no. some have abs, some dont. the diesel shaft is larger.