I have a Peugeot 306 that I am tring to change the door stop and door check. I have the parts but it looks like I may need to take the door panel off to gain access to the inside of the door to attach the mechanism.|||Yep the door card will have to come partially off. I had to do the same repair job to my 306. If I have remembered correctly there is a torq bolt on the under side of the door handle that you will have to loosen. If you have electric widows you will have to disconnect the switches to get the door card pulled far enough out, be careful with the switches, if they fall apart they are a bugger to put back together.
Good luck|||The door panel needs removed to fit the door check strap on a 306,or at least the front edge to get your hand inside the door Not a hard job though,but ask if you need more help.|||ok. you need a torx bit, to undo three bolts, one behind the speaker, one under the door handle, and the last under the window switch (just gently lever it up). you also need to slide off the piece of plastic on your side of the mirror, once done slide a flat blade (not sharp) under the door card near the mirror and work around the door card, till it is free, you can disconnect the wires from speaker and window switch, then its just a bit fiddly to work the damaged door check out after undoing the two 10mm bolts, replacing is vice-versa. and your done. ( did mine last week)
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment